Licensed & Insured, in St. Louis and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in St. Louis
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (314) 689-1531 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in St. Louis and surrounding areas · On-site visits included · Free estimate within 24h
St. Louis Metal Roofing is a team of local certified professionals based in St. Louis. We respond quickly in St. Louis and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (314) 689-1531⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews
“Needed a metal building roof put up out on our rural property and these guys handled the whole thing. 40x60 structure, crew of four, done in three days. Straight panels, clean lines, no mess left behind.”
Commercial Metal Roofing
“We had the copper roofing on our brick house redone after years of patina and a couple of problem seams. The crew matched the original detailing beautifully and the new copper looks incredible against the brick. Wasn't cheap, but you get what you pay for with specialty metal.”
Copper & Specialty Metal Roofing
“Our old barn roof was leaking every time it rained and we figured it was a goner. St. Louis Metal Roofing put up new ribbed panels on the whole thing in two days and it's been bone dry since. Even cleaned up all the old screws and scraps without me asking.”
Commercial & Agricultural Metal Roofing
“Standing seam install on our house, about 2,200 square feet. Crew was professional and the finished roof looks sharp. Only gripe is they showed up a day later than scheduled, but they more than made up for it with the quality of the work.”
Standing Seam Metal Roofing
“Had a gutter pulling away from the roofline on our brick house and water was running down the side. They came out, re-secured everything properly for a metal roof setup, and even checked the flashing while they were up there. Quick, fair price, no upsell nonsense.”
Gutters for Metal Roofs
“We went with a metal roof on our brick home after getting tired of replacing shingles every decade. The install took about four days and the crew was respectful of our landscaping the whole time. Honestly relieved we finally did it.”
Metal Roof Installation
“Old slate-style roof was failing and we had them tear it off and replace with a stone-coated steel system that keeps the same look. Flashing and chimney work were handled in the same job. Two months in and it's held up through some serious storms.”
Metal Roof Replacement
“Our Tudor-style house needed the roof redone and I wanted something that kept the character of the place. They recommended metal shingles and I couldn't be happier, looks close to the original slate from the street but way more durable. Small scheduling hiccup, but the result speaks for itself.”
Metal Shingle RoofingReal photos of our work in St. Louis · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel installation | Starting at $8/sq ft | Includes tear-off, underlayment, panels, and basic trim; pitch and deck condition move the price |
| Standing seam installation | Starting at $14/sq ft | Hidden fasteners, raised seams, and premium trim; roof complexity and panel gauge drive cost |
| Metal shingle or stone-coated steel | Starting at $16/sq ft | Stamped or granule-coated panels with architectural trim; historic district approval can add time |
| Complex or large-scale roof | On estimate | Turrets, multiple valleys, dormers, and steep pitches need an on-site measure before pricing |
| Travel | Included | in St. Louis and surrounding metro areas, with no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (314) 689-1531, with no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard standing seam install | Starting at $10/sq ft | Includes underlayment, concealed clips, and mechanically seamed panels on a standard pitched roof. |
| Class 4 impact panels | Starting at $13/sq ft | Hail-rated heavier gauge for St. Louis County homes, priced above standard panels. |
| Historic-profile install | Starting at $15/sq ft | Narrower seam spacing and period colors for mansards and historic district homes. |
| Complex or steep roof | On estimate | Turrets, multiple penetrations, and steep pitches need an on-site look before we quote. |
| Travel | Included | in St. Louis and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (314) 689-1531, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener replacement | Starting at $9/sq ft | Full tear-off, deck inspection, corrugated or ribbed panels; price rises with pitch and deck repairs. |
| Standing seam replacement | Starting at $14/sq ft | Concealed-fastener panels, full tear-off, underlayment; complex roof geometry moves the number up. |
| Stone-coated steel replacement | Starting at $12/sq ft | Steel shingles with stone granule surface, tear-off included; historic district review may add cost. |
| Copper or specialty metal | On estimate | Hand-formed copper for turrets and complex roofs needs an on-site look before pricing. |
| Travel | Included | in St. Louis and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (314) 689-1531, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one layer of shingles | Starting at $7/sq ft | Includes deck inspection, synthetic underlayment, and standard trim on a simple gable roof. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed-fastener panels with raised seams, priced higher for the profile and trim work. |
| Stone-coated steel retrofit | Starting at $10/sq ft | Textured steel shingles for HOA or historic districts that restrict panel profiles and colors. |
| Complex or steep-pitch roof | On estimate | Multiple valleys, turrets, or steep pitches need an on-site look before we quote a number. |
| Travel | Included | In St. Louis and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (314) 689-1531, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seam resealing or minor leak repair | Starting at $450 | Includes cleaning and resealing seams or penetrations, plus a water test on the repair. |
| Screw replacement and re-fastening | Starting at $650 | Covers pulling failed screws and replacing washers; price rises with roof size and pitch. |
| Panel replacement (storm damage) | Starting at $850 | Includes removing and replacing damaged panels; cost moves with panel count and metal type. |
| Flashing, chimney, or skylight repair | Starting at $550 | Covers rebuilding failed flashing around a chimney or skylight; access and height affect the price. |
| Complex or large-scale repair | On estimate | Multi-area storm damage or steep access needs an on-site look before we quote a number. |
| Estimate | Free | Response within 24 hours at (314) 689-1531, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak diagnosis and repair | Starting at $450 | Includes inspection, water test, and a straightforward fastener or flashing fix on an accessible roof section. |
| Fastener replacement (partial run) | Starting at $650 | Replaces corroded or backed-out screws with new washers on one panel run, priced by linear footage. |
| Flashing rebuild at chimney or skylight | Starting at $850 | Rebuilds counterflashing and sealant at masonry penetrations, with cost rising on steep or complex roofs. |
| Panel replacement (standing seam or shingle) | Starting at $1,200 | Cuts out and replaces a damaged panel, matches profile and color, and re-clips for thermal movement. |
| Emergency tarping after storm | Starting at $350 | Secures a temporary weatherproof cover to stop active leaks, credited toward the permanent repair. |
| Estimate | Free | On-site inspection and written scope within 24 hours at (314) 689-1531, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Partial re-fastening (garage or small shop) | From $750 | Covers failed screws, new EPDM washers, and a written repair summary on a typical small roof |
| Full roof re-screw (residential) | From $1,450 | Systematic replacement of every fastener on a standard ranch or bungalow roof |
| Barn or agricultural building re-screw | On estimate | Priced by linear foot of panel, fastener count, and whether purlins are wood or steel |
| Emergency storm re-fastening | On estimate | Same-week response for lifted panels and active leaks after hail or wind events |
| Travel | Included | In St. Louis and surrounding counties, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (314) 689-1531, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple outbuilding | Starting at $5.50/sq ft | Includes panels, screws, closures, standard trim, and labor on an accessible single-slope roof. |
| R-panel or 5V roof, house-attached garage | Starting at $6.75/sq ft | Adds underlayment, edge metal, and flashing tie-ins where the roof meets the house wall. |
| Tear-off of existing shingles before panel install | Starting at $1.50/sq ft | Covers removal, dumpster, and disposal, with deck inspection and minor repairs as needed. |
| Steep, tall, or cut-up roof (barn, cupola, multiple penetrations) | On estimate | Pitch, height, and penetration count drive the labor, so we measure before quoting a number. |
| Travel | Included | In St. Louis and surrounding counties, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (314) 689-1531, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stamped steel shingle roof | Starting at $9/sq ft | Includes tear-off, synthetic underlayment, and standard flashing; price rises with roof pitch and complexity. |
| Stone-coated steel shingle roof | Starting at $12/sq ft | Class 4 impact-rated panels with granular finish; cost moves up on steep roofs and multiple valleys. |
| Copper or specialty shingle roof | On estimate | Copper and custom profiles need an on-site look for panel count, patina finish, and historic review. |
| Retrofit over existing shingles | Starting at $7/sq ft | Installed over a prepared deck within code layer limits; savings depend on existing roof condition. |
| Travel | Included | In St. Louis and surrounding counties, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (314) 689-1531, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel installation, simple gable | Starting at $9/sq ft | Includes tear-off, synthetic underlayment, standard flashing, and panels on a walkable pitch. |
| Stone-coated steel installation, complex roof | Starting at $11/sq ft | Covers dormers, valleys, and chimney flashing on steeper pitches common to Tudor and colonial homes. |
| Retrofit over existing shingles | Starting at $8/sq ft | Panels go over one sound layer where code allows, saving tear-off and disposal cost. |
| Storm or hail replacement | On estimate | We document damage and scope the full panel replacement before quoting, since insurance scope varies. |
| Travel | Included | In St. Louis and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (314) 689-1531, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper flat-seam or standing seam roof | Starting at $20/sq ft | Includes 20 oz copper pans, underlayment and seamed installation on accessible roof areas. |
| Zinc or terne-coated stainless roof | Starting at $22/sq ft | Includes dark-finish specialty metal, concealed cleats and custom seam layout for the roof. |
| Bay window, dormer or turret cap | On estimate | Curved and tapered geometry needs on-site templating before any number is given. |
| Custom copper flashing and trim | On estimate | Chimney, parapet and wall tie-ins priced by linear foot after we inspect the brick. |
| Travel | Included | in St. Louis and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (314) 689-1531, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Acrylic coating system | Starting at $2.50/sq ft | Includes wash, light rust treatment, primer, and one acrylic finish coat on a sound panel roof. |
| Urethane or silicone system | Starting at $4.00/sq ft | Higher solids and hail resistance, priced up for steep pitch, lift access, and heavier prep. |
| Rust treatment and spot repair | On estimate | Active rust at fasteners and cut edges needs an on-site look before a number is given. |
| Historic or HOA color match | On estimate | Color approval and factory match add a step before material is ordered for the job. |
| Travel | Included | in St. Louis and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (314) 689-1531, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Chimney flashing rebuild | Starting at $600 | Includes removal of old flashing, new step and counter-flashing, and a cricket where needed. |
| Skylight curb flashing | Starting at $850 | Includes curb inspection, new bent flashing, and resealing the skylight to the curb. |
| Dormer or sidewall flashing | Starting at $700 | Includes new step flashing woven into the roof and a bent wall cap. |
| Parapet or party-wall flashing | On estimate | Masonry work, roof access, and building height vary too much to quote blind. |
| Travel | Included | In St. Louis and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (314) 689-1531, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pad-style snow guards, single-family roof | Starting at $1,200 | Covers guard layout and install on main slide zones; pitch and row count move the price. |
| Bar and rail system over entries | Starting at $2,100 | Continuous rail above walkways and entries; eave height and access drive the number. |
| Seam-clamp guards on copper or standing seam | Starting at $1,800 | Non-penetrating clamps matched to the seam; specialty metal and finish add time. |
| Ice barrier and eave detailing | Starting at $950 | Underlayment and edge metal to manage meltwater; roof access and tear-off affect cost. |
| Complex or large-scale job | On estimate | Steep mansards, multiple roof planes, and historic review need an on-site look first. |
| Estimate | Free | Response within 24h at (314) 689-1531, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and damage report | Free | Full roof walk, photos of every hit, and a written repair-versus-replace recommendation |
| Single panel or isolated repair | Starting at $450 | Includes one matching panel, trim, sealant, and labor; pitch and access move the price |
| Multi-panel or slope-wide repair | Starting at $1,200 | Covers several panels plus re-fastening; panel count and material type drive the total |
| Wind re-fastening across a full roof | On estimate | Needs an on-site count of backed-out screws and a check of underlayment condition |
| Insurance documentation package | Included | Photo log, measurements, and itemized scope prepared for your adjuster at no extra charge |
| Estimate and travel | Free | In St. Louis and surrounding areas, response within 24 hours at (314) 689-1531 |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Walk, photo report, and repair or replace recommendation at no charge for most homes |
| Post-storm hail and wind inspection | Free estimate | Documented findings for insurance, with urgency and roof pitch the main cost factors |
| Pre-purchase buyer inspection | On estimate | Written remaining-life estimate and repair range, priced by roof size and access |
| Commercial or agricultural metal roof | On estimate | Larger panel counts and walkable low-slope roofs need an on-site scope before quoting |
| Travel | Included | In St. Louis and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (314) 689-1531, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard profile | Starting at $9/linear ft | Includes on-site fabrication, hidden hangers, and standard downspouts for a typical single-story run. |
| Oversized 6-inch or 7-inch run | Starting at $14/linear ft | Higher capacity for steep metal roofs and heavy tree canopy; price rises with run length and hanger count. |
| Half-round steel or copper | Starting at $22/linear ft | Historically correct profile for brick rowhouses and historic review; copper and soldered joints move the number. |
| Leaf protection add-on | Starting at $6/linear ft | Micro-mesh or reverse-curve guard fitted to the gutter and panel edge; wooded lots need this most. |
| Complex or large-scale job | On estimate | Rotted fascia, multi-level rooflines, and tight alley access need an on-site look before a number is given. |
| Estimate | Free | Response within 24 hours at (314) 689-1531, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written scope | Free estimate | Full roof walk, photos of problem areas, and a written scope before any number is quoted. |
| Agricultural repair or re-fastening | Starting at $1,500 | Screw replacement, sealant renewal, and panel patching on barns and sheds; size and access drive the price. |
| Exposed-fastener ribbed panel install | Starting at $6 per sq ft | Screw-down steel over new or prepared deck; gauge, insulation, and penetration count move the number. |
| Standing seam commercial replacement | On estimate | Concealed-fastener system on warehouses and churches; pitch, deck condition, and HVAC curbs need an on-site look. |
| Travel | Included | In St. Louis and surrounding counties, no separate call-out or mileage fee for estimates. |
| Estimate | Free | Response within 24 hours at (314) 689-1531, no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in St. Louis need a crew that understands this city's steep pitches, heavy tree cover, and the aging screw-down roofs found across the region. St. Louis Metal Roofing is your local source for metal roof installation, replacement, re-roof, and repair on homes from the river bluffs to the outer suburbs. We work on the brick bungalows of South City, the historic rowhouses near Soulard, and the newer two-story homes in Chesterfield and Wildwood.
Our network of licensed, insured local contractors serves St. Louis, Clayton, Kirkwood, Webster Groves, University City, and the surrounding areas. We know how spring hail, summer humidity, winter ice storms, and freeze-thaw cycles stress a metal roof, and we plan every project around those conditions. If you are ready for straight answers and a clear scope of work, call (314) 689-1531 or request a free estimate.
Metal roof leaks rarely announce themselves at the point of entry. On 15 to 30 year old exposed-fastener roofs, the most common culprit is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once the washer fails, water slips past the screw head and tracks along purlins and decking, sometimes showing up feet away from the actual breach. Seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are close behind. Wind-lifted panels after a storm and punctures from fallen limbs round out the list.
Ignoring a small leak is expensive. Water that travels along the decking can rot sheathing, saturate insulation, and stain interior finishes long before you see a drip. That is why our first step is a careful metal roof leak repair inspection to find the true source, not just the wet spot. In many cases, a full screw replacement and re-fastening restores a watertight roof for a fraction of replacement cost. When the deck is sound and the panels are still serviceable, we say so plainly.
The honest repair-versus-replace call depends on panel condition, fastener age, and how much water has already reached the structure. We will tell you when a targeted repair is the right move and when a replacement makes more financial sense. For urgent leaks, storm damage, or a roof that has been patched one too many times, call (314) 689-1531 and we will schedule an assessment. You can also contact us online to get started.
We install the full range of metal roofing systems, and we match the system to your home rather than pushing one product. Standing seam metal roofing uses concealed clips and hidden fasteners for a clean, premium look with no exposed screws to maintain. Corrugated and ribbed panel roofing is the economical workhorse for cabins, barns, and workshops. We also install metal shingles, stone-coated steel, and copper and specialty metal for accents and historic profiles.
The honest comparison is simple: standing seam costs more up front but has no exposed fasteners to service, while screw-down panels cost less and need their fasteners checked and replaced over the roof's life. When your existing shingles are sound and the deck is in good shape, metal roof over shingles (retrofit) can be a legitimate way to save on tear-off. When the deck is soft or the layers are already at the limit, a full tear-off and metal roof replacement is the right call.
Metal roof projects are typically quoted per square foot for installations, while repairs are often priced as flat-rate jobs. The final number depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, decking condition, and access around the home. Because every roof is different, we give you a written scope and a clear price before any work begins. You can review general guidance on our pricing page and then request a free estimate for your specific roof.
Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer and is never a guarantee. We frame all figures as typical ranges only, and final pricing depends on the roof and site conditions. For a free roof inspection or a no-pressure estimate, call (314) 689-1531 or reach out through our contact page.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We never suggest that a deductible could be waived, absorbed, or paid by the contractor, and we do not use "free roof" or "no cost to you" language. Our role is to document conditions accurately and let you and your carrier decide the next step.
On permits: in most jurisdictions, a permit is commonly required for a full replacement, but requirements vary by city and by project scope. Historic district or HOA design review can also affect panel profile and color choices, so it is worth checking early. Requirements vary, always verify with the St. Louis building or planning department before starting your project. If you have questions about documentation or scheduling, contact our team.
Ready to get started? St. Louis Metal Roofing serves in St. Louis and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in St. Louis · Response within 24h · No commitment · ☎ (314) 689-1531
Your Free Quote Request